Before you deploy the Azure Stack Development Kit (ASDK), make sure your development kit host computer meets the requirements described in this article.
|Disk drives: Operating System||1 operating system disk with minimum of 200 GB available for system partition (SSD or HDD)||1 OS disk with minimum of 200 GB available for system partition (SSD or HDD)|
|Disk drives: General development kit data*||4 disks. Each disk provides a minimum of 240 GB of capacity (SSD or HDD). All available disks are used.||4 disks. Each disk provides a minimum of 400 GB of capacity (SSD or HDD). All available disks are used.|
|Compute: CPU||Dual-Socket: 16 Physical Cores (total)||Dual-Socket: 20 Physical Cores (total)|
|Compute: Memory||192 GB RAM||256 GB RAM|
|Compute: BIOS||Hyper-V Enabled (with SLAT support)||Hyper-V Enabled (with SLAT support)|
|Network: NIC||Windows Server 2012 R2 Certification. No specialized features required||Windows Server 2012 R2 Certification. No specialized features required|
|HW logo certification||Certified for Windows Server 2012 R2||Certified for Windows Server 2016|
* You need more than this recommended capacity if you plan on adding many of the marketplace items from Azure.
Data disk drive configuration: All data drives must be of the same type (all SAS, all SATA, or all NVMe) and capacity. If SAS disk drives are used, the disk drives must be attached via a single path (no MPIO, multi-path support is provided).
HBA configuration options
- (Preferred) Simple HBA
- RAID HBA – Adapter must be configured in “pass through” mode
- RAID HBA – Disks should be configured as Single-Disk, RAID-0
Supported bus and media type combinations
- SATA HDD
- SAS HDD
- RAID HDD
- RAID SSD (If the media type is unspecified/unknown*)
- SATA SSD + SATA HDD
- SAS SSD + SAS HDD
* RAID controllers without pass-through capability can’t recognize the media type. Such controllers mark both HDD and SSD as Unspecified. In that case, the SSD is used as persistent storage instead of caching devices. Therefore, you can deploy the development kit on those SSDs.
Example HBAs: LSI 9207-8i, LSI-9300-8i, or LSI-9265-8i in pass-through mode
Sample OEM configurations are available.
|OS Version||Windows Server 2016 or later. The operating system version isn’t critical before the deployment starts, as you’ll boot the host computer into the VHD that’s included in the Azure Stack installation. The operating system and all required patches are already integrated into the image. Don’t use any keys to activate any Windows Server instances used in the development kit.|
Typically, you deploy the development kit with internet connectivity, where you can connect to Microsoft Azure. In this case, you must configure an Azure Active Directory (Azure AD) account to deploy the development kit.
If your environment is not connected to the internet, or you don’t want to use Azure AD, you can deploy Azure Stack by using Active Directory Federation Services (AD FS). The development kit includes its own AD FS and Active Directory Domain Services instances. If you deploy by using this option, you don’t have to set up accounts ahead of time.
One available port on a switch for the development kit machine.
The development kit machine supports connecting to a switch access port or trunk port. No specialized features are required on the switch. If you are using a trunk port or if you need to configure a VLAN ID, you have to provide the VLAN ID as a deployment parameter.
Do not connect the development kit machine to the following subnets:
These subnets are reserved for the internal networks within the development kit environment.
Only IPv4 is supported. You cannot create IPv6 networks.
Make sure there is a DHCP server available on the network that the NIC connects to. If DHCP is not available, you must prepare an additional static IPv4 network besides the one used by host. You must provide that IP address and gateway as a deployment parameter.
Azure Stack requires access to the Internet, either directly or through a transparent proxy. Azure Stack does not support the configuration of a web proxy to enable Internet access. Both the host IP and the new IP assigned to the AzS-BGPNAT01 (by DHCP or static IP) must be able to access Internet. Ports 80 and 443 are used under the graph.windows.net and login.microsoftonline.com domains.